=======================================================
E10K Commands:
=======================================================
:Title:        E10K Commands:
:Author:       Douglas O'Leary <dkoleary@olearycomputers.com>
:Description:  E10K Commands:
:Date created: 08/1999
:Date updated: 09/1999
:Disclaimer:   Standard: Use the information that follows at your own risk.  If you screw up a system, don't blame it on me...

Platform related commands
==========================

cb_reset
    Resets and reboots control boards which will reset all active domains. 
    Use this only when the control boards have stopped responding or when 
    you need to change the control boards' IP addresses.

cb_prom
    Used to update the flash PROM on the control boards.

domain_create
    Used to create domains

    -d ${domain_name}:
        Name of the domain; must also be the domain's hostname
    -b ${sbs[*]}
        List of system boards that will comprise the new domains separated 
        by spaces.
    -o ${os_version}
        The OS version that will be installed on the new domain
    -p ${E10K_name}
        The name of the E10K platform; useful for when your SSP is managing 
        more than one E10K platform.

domain_history
    Displays the contents of the domain_history file showing which domains 
    have been removed but can be recreated and which system boards compose 
    them.

domain_remove
    Removes/deactivates domains. Only argument: -d ${domain_name}

domain_rename
    Renames domain names

    -d ${old_name}
        Old domain name
    -n ${new_name}
        New domain name

domain_status
    Displays the contents of the domain_config file showing which domains 
    can be activated and which boards are contained within them.

domain_switch
    An alias that changes the value of the SUNW_HOSTNAME parm and the prompt.

edd_cmd -x [start|stop]
    Turns on/off edd processing.

fan
    Displays and controls power and speed settings for fans.

    -l {front|rear}
        Display power speed settings for fans on front/rear of system only.
    -t # # #
        Apply action to selected fan trays only.
    -p {on|off}
        Turn on/off power to selected fan trays. If no -t #, applies action 
        to all fan trays.
    -s { nominal | fast}
        Change the speed setting for selected fan trays. If no -t #, applies 
        action to all fan trays.

hostview
    Provides GUI access to most E10K platform/domain management tasks.

sys_clock    
    No description

ssp_config   
    No description

ssp_unconfig     
    No description

autoconfig   
    No description

board_id     
    No description

redx     
    No description

Domain specific commands
========================

bringup
    Sets the h/w config, configures the centerplane if needed, runs POST, 
    loads and starts OBP, and starts the netcon_server

        -f Don't check to see if domain is already running. Will crash a 
        running domain

        -A {on|off} Toggles the auto-boot? OBP parameter.
        -C Forces configuration of the centerplane. Any running domains will 
        crash
        -l {7-15} Diagnostic level; 7 takes a long time; 15 will take forever.

check_host   
    No description

hostinfo
    Provides detailed system status information

    -F  Provides fan status
    -S  Provides CPU signature information
    -h  Provides detailed CPU information
    -p  Provides system component power status
    -t  Provides system temperature information

hpost    
    No description

netcontool   
    No description

power
    Directs the control board to change the system power state:

    -on Turns on power
    -all Apply power to everything: full cmd: power -on -all
    -off Turns off power
    -B Turns off power to everything: Full cmd: power -B -off
    -sb [n n# n## ...] Apply action to specific system boards
    -s  Turn on/off selected power supplies
    -p  Turn on/off specific power distribution units

sigbcmd  
    No description

sys_clock    
    No description

sys_id
    (Re)Creates or checks the domain eeprom.image file.

    -f eeprom.image.${domain_name} Resulting output filename
    -k ${key} Domain key that SUN provides
    -s ${serial} Domain serial number used to create the first domain
    -h ${hostid} Hostid that SUN provides used to create additional domains
    -d  Confirms proper eeprom.image file creation

sys_reset    
    No description

netcon   
    No description

hostint  
    No description

hostreset    
    No description

drview   
    No description

netcon_server    
    No description

drain
    No description

reconfig
    No description