| arraydsp: Displays Array Configuration Information |
Logprint: Displays log entries |
|
|
| Arg |
Meaning |
Arg |
Meaning |
| -a |
Quick view of everything |
-t |
Type of log. Valid entries: usage, disk, ctrlr change, perf |
| -c |
Controller information |
-d |
Log directory name |
| -d |
Displays disk information |
-s |
Start time (mmddhhmm[yy] format) |
| -h |
H/W information |
-e |
End time (mmddhhmm[yy] format) |
| -i |
Displays serial numbers for all attached arrays |
-a <id> |
Array serial number |
| -l |
Displays lun information |
Arraycfg: Configures HP RAIDs |
| -m |
Performance statistics |
Arg |
Meaning |
| -r |
Performance recommendations |
-L LUN |
Specifies the LUN number on which to operate (mandatory) |
| -R |
Rescans the I/O bus for more arrays |
-a Capacity |
Creates a LUN of Capacity megs size |
| -s |
Displays generic setting information |
-d |
Deletes the specified lun |
| -v |
Current Raid 0/1 capacity |
-r newLun |
Renumbers a lun |
| arraymgr: Configures global array settings
| arrayid |
The array on which to operate (mandatory) |
| Arg
| Meaning
|
|
|
| -a { on|off }
| Turn on/off auto rebuild.
|
|
|
| -h { on|off }
| Turn off/off the active spare.
|
|
|
| -i { on | off }
| Turn on/off auto include
|
|
|
| -p {high|low}
| Set auto rebuild priority
|
|
|