E10K Commands:¶
- Title:
E10K Commands:
- Author:
Douglas O’Leary <dkoleary@olearycomputers.com>
- Description:
E10K Commands:
- Date created:
08/1999
- Date updated:
09/1999
- Disclaimer:
Standard: Use the information that follows at your own risk. If you screw up a system, don’t blame it on me…
Domain specific commands¶
- bringup
Sets the h/w config, configures the centerplane if needed, runs POST, loads and starts OBP, and starts the netcon_server
-f Don’t check to see if domain is already running. Will crash a running domain
-A {on|off} Toggles the auto-boot? OBP parameter. -C Forces configuration of the centerplane. Any running domains will crash -l {7-15} Diagnostic level; 7 takes a long time; 15 will take forever.
- check_host
No description
- hostinfo
Provides detailed system status information
- -F
Provides fan status
- -S
Provides CPU signature information
- -h
Provides detailed CPU information
- -p
Provides system component power status
- -t
Provides system temperature information
- hpost
No description
- netcontool
No description
- power
Directs the control board to change the system power state:
-on Turns on power -all Apply power to everything: full cmd: power -on -all -off Turns off power -B Turns off power to everything: Full cmd: power -B -off -sb [n n# n## …] Apply action to specific system boards -s Turn on/off selected power supplies -p Turn on/off specific power distribution units
- sigbcmd
No description
- sys_clock
No description
- sys_id
(Re)Creates or checks the domain eeprom.image file.
-f eeprom.image.${domain_name} Resulting output filename -k ${key} Domain key that SUN provides -s ${serial} Domain serial number used to create the first domain -h ${hostid} Hostid that SUN provides used to create additional domains -d Confirms proper eeprom.image file creation
- sys_reset
No description
- netcon
No description
- hostint
No description
- hostreset
No description
- drview
No description
- netcon_server
No description
- drain
No description
- reconfig
No description